Features:
- Low VSWR
- Low PIM
-
+86-28-6115-4929 -
sales@qualwave.com
Low PIM Terminations RF Radio Millimeter Wave High Frequency
Low PIM terminations are passive components used in RF and microwave systems that are specifically designed to minimize the passive intermodulation (PIM) effect. PIM is signal distortion caused by nonlinear components or poor contacts, which may seriously affect the performance of communication systems.
Purpose:
1. Signal Termination: Radio frequency load is used to terminate RF and microwave transmission lines to prevent signal reflection and standing wave formation, thereby ensuring system stability and performance.
2. PIM Suppression: RF terminations are specifically designed to minimize passive intermodulation effects, ensuring that PIM levels in the system are kept to a minimum, thus improving the purity and quality of the signal.
3. System Calibration: Millimeter wave terminals are used for system calibration and testing to ensure the accuracy and repeatability of measurement results.
Features:
1. Low PIM load is mainly used for RF testing and measurement, passive intermodulation measurement systems, measurement of high-power amplifiers or transmitters, and as a calibration device for network analyzers.
2. In RF testing and measurement, Low PIM termination ensures the accuracy of the test, and by absorbing power diaphragms, it provides a guarantee for accurately measuring the intermodulation index of passive components.
3. In a passive intermodulation measurement system, a Low PIM termination is connected to one port of the device under test to ensure the progress of the test, otherwise the test cannot be carried out.
In the measurement of high-power amplifiers or transmitters, Low PIM terminations are used to replace antennas and absorb all carrier power to ensure measurement accuracy.
As a calibration device for network analyzers, low intermodulation load can ensure the accuracy of calibration.
In summary, Low PIM termination is widely used in the RF and microwave fields, and is crucial for ensuring the accuracy of testing and measurement.
Qualwave supplies Low PIM termination at frequencies from DC to 0.35GHz, and the power is up to 200W. Our Low PIM termination are widely used in many areas
Part Number |
RF Frequency(GHz, Min.)  |
RF Frequency(GHz, Max.) |
Power(W) |
IM3(dBc, Max.) |
Waterproof Rating |
VSWR(Max.) |
Connectors |
Lead Time(Weeks) |
|---|---|---|---|---|---|---|---|---|
| QLPT02K1-2.7-7F-165 | 0.698 | 2.7 | 100 | -165 | - | 1.2 | 7/16 DIN(L29) Female | 0~4 |
| QLPT0305-3-7-150 | 0.6 | 3 | 5 | -150 | - | 1.3 | 7/16 DIN(L29) Male | 0~4 |
| QLPT0650 | 0.35 | 6 | 50 | -150, -155, -160 | IP65, IP67 | 1.3 | N, 7/16 DIN(L29), 4.3-10 | 0~4 |
| QLPT06K1 | 0.35 | 6 | 100 | -150, -155, -160 | IP65, IP67 | 1.3 | N, 7/16 DIN(L29), 4.3-10 | 0~4 |
| QLPT06K2 | 0.35 | 6 | 200 | -150, -155, -160 | IP65, IP67 | 1.3 | N, 7/16 DIN(L29), 4.3-10 | 0~4 |
| QLPT1040-10-NF-166 | DC | 10 | 40 | -166 | - | 1.5 | N Female | 0~4 |
| QLPT0302-3-N-120 | DC | 3 | 2 | -120 | - | 1.15 | N Male | 0~4 |
| QLPT0305-3-N-120 | DC | 3 | 5 | -120 | - | 1.15 | N Male | 0~4 |
| QLPT0310 | DC | 3 | 10 | -140 | IP65 | 1.2 | N, 7/16 DIN(L29) | 0~4 |
| QLPT0325-3-N-120 | DC | 3 | 25 | -120 | - | 1.2 | N Male | 0~4 |
| QLPT0350 | DC | 3 | 50 | -120 | IP65 | 1.2 | N, 7/16 DIN(L29) | 0~4 |
| QLPT03K1-3-N-120 | DC | 3 | 100 | -120 | - | 1.2 | N Male | 0~4 |
| QLPT03K1-3-4-150 | DC | 3 | 100 | -150 | - | 1.2 | 4.3-10 Male | 0~4 |
| QLPT03K3-3-N-120 | DC | 3 | 300 | -120 | - | 1.35 | N Male | 0~4 |
-
Dust Caps 2.92mm Coaxial Coax RF Microwave Mill...
-
RF Cables and RF Cable Assemblies Microwave Mil...
-
Programmable Attenuators USB RF Digital Step US...
-
Medium Power Waveguide Terminations RF Microwav...
-
Surface Mount Relay Switches RF Microwave mm-wa...
-
Single Directional Broadwall Couplers Broadband...