-
Power amplifier Systems, Frequency 5.6~5.8GHz, Gain 25dB, Output Power (P1dB) 50W, Output Power (Psat) 100W
As a key component of the transmission system, Power Amplifier Systems shoulders the responsibility of amplifying weak RF signals to achieve effective wireless transmission. Its performance directly affects communication quality and efficiency. Charac...Read more -
2-Way Power Divider, Frequency 5~6GHz, Power 200W, N-type
The 2-way power divider is a RF microwave passive device, which is mainly used to evenly divide one input signal into two output signals. It is widely used in wireless communication, radar, radio and television, test and measurement and other fields. ...Read more -
DC~110GHz，1.0mm Female End Launch Connector
End launch connector is an electronic component used to achieve circuit connections without the need for soldering operations. The following is a specific introduction to it: Characteristic: 1.Easy installation: No welding operation is required, red...Read more -
Limiter, Frequency 1~18GHz, Flat Leakage 10dBm
The limiter is mainly used to limit the amplitude of the signal. Application scenarios include: 1. Audio processing: In places such as radio stations and recording studios, limiters are used to control the dynamic range of audio signals and prevent si...Read more -
Switch Matrix, DC~40GHz, 3*SP6T, Manual&Program Control, With Indicator Light
A switch matrix is an electronic component or system primarily used for signal switching and routing. Structurally, it consists of multiple input ports, multiple output ports, and a large number of switching elements that can change their connection state under th...Read more -
Standard Gain Horn Antenna , WR-10 Series, Frequency 73.8~112GHz
Standard gain horn antenna is a microwave antenna widely used in antenna measurement and other fields, with the following characteristics: 1. Simple structure: composed of circular or rectangular cross-sections gradually opening at the end of the wave...Read more -
Waveguide To Coax Adapters, WR10 to 1.0mm Series
A waveguide to coaxial adapter is a device used to connect waveguide devices with coaxial cables, with the main function of converting signals between waveguides and coaxial cables. There are two styles: Right Angle and End Launch. Has the following ...Read more -
Dual Directional Coupler, Frequency 0.03~30MHz, 5250W, 50dB
Double directional coupler is a four port RF device, which is a commonly used standard and key component in microwave measurement. Its function is to couple a small portion of power on one transmission line to another output port, while allowing the m...Read more -
16 Way Power Dividers , Frequency 6~18GHz, 20W，SMA
A 16 way power divider/combiner is a commonly used RF and microwave circuit component with 16 input ports or 16 output ports.The difference in output power between each port is extremely small, which helps ensure the consistency of sign...Read more -
IQ Mixer 6~26GHz, Low Conversion Loss, High Isolation
IQ mixers (In - Phase and Quadrature mixers) use two mixers to mix the input signal with in-phase (I) and quadrature (Q) local oscillator signals. IQ mixers have excellent image suppression capability, good retention of phase informatio...Read more -
Coaxial switch, DC~40GHz, SP7T~SP8T, QMS8K series
An RF coaxial switch is a device used in RF and microwave communication systems to establish or switch connections between different coaxial cable paths. It allows for the selection of a specific input or output path from multiple optio...Read more -
2 Way Power Dividers , Frequency 2~4GHz, isolation of 40dB
2-way power divider/combiner is a passive RF component that allows a single input signal to be divided into two equal output signals, or two input signals to be combined into a single output signal. The 2-way power divider/combiner gene...Read more -
Power 50W CW (47dBm) limiter, frequency 0.05-6GHz, flat leakage of 17dBm
A limiter is aelectronic device used to limit the amplitude of a signal within a certain range to prevent signal overload or distortion. They work by applying a variable gain to the incoming signal, reducing its amplitude when it exceed...Read more -
Power amplifier Systems, Frequency 0.02~0.5GHz, Gain 47dB, Output Power (Psat) 50dBm (100W)
The power amplifier systems, as the main component of the RF front-end transmission channel, is mainly used to amplify the low-power RF signal generated by the modulation oscillation circuit, obtain sufficient RF output power, and achie...Read more -
Low noise amplifier, frequency 0.5~18GHz, gain 14dB, noise figure 3dB
A low noise amplifier is an amplifier with a very low noise figure, used in circuits to amplify weak signals and minimize the noise introduced by the amplifier. Low noise amplifier is generally used as the high-frequency or intermediate frequency prea...Read more -
A series of connectors to effectively solve testing challenges
Qualwave Inc. has launched a series of connectors that can effectively solve testing challenges. Today, we introduce to our dear customers and partners. The products are divided into four categories, include End launch connectors, Verti...Read more -
Dual directional coupler, 9KHz~100MHz, 3500W, 50dB
Dual Directional Coupler is a widely used microwave device mainly used for power measurement and signal analysis of electromagnetic signals. The characteristics of broadband high-power dual directional couplers are as follows: ...Read more -
Qualwave attendes EuMW 2022 in Milan, Italy.
EuMW Booth No.: A30 Qualwave Inc, as a supplier of microwave and millimeter wave components, highlightes its 110GHz components, including but not limited to terminations, attenuators, c...Read more
-
+86-28-6115-4929 -
sales@qualwave.com
