Features:
- Broadband
- High Power
- Low Insertion Loss
-
+86-28-6115-4929 -
sales@qualwave.com
Broadband High Power Low Insertion Loss Single Directional Loop Couplers
A waveguide loop coupler is a microwave device consisting of a loop waveguide and two transmission lines.
This waveguide coupler is mainly used for bandpass filteloop and short-circuit impedance matching for transmission lines. This coupler can transfer high-frequency energy from one transmission line to another, thereby achieving beam coupling.
The working principle of waveguide loop coupler mainly depends on two aspects: the transmission characteristics of the loop coupler and the microstrip line.Directional coupler refers to a power divider with directionality.
The loop coupler is a key component in waveguide loop couplers, which mainly plays a role in energy coupling.
This annular coupling consists of two adjacent half loops, with one half loop serving as the input port and the other half loop serving as the output port. When the high-frequency signal reaches the annular coupling along the input port, it will be transmitted to the adjacent half loop. At this point, due to the presence of the magnetic field, the signal will also be transmitted to the other half loop, thereby achieving energy coupling. Ultimately, it is possible to couple the input signal from the input port to the output port while ensuloop a high degree of coupling efficiency.
Main performance indicators of single directional loop couplers
The main performance indicators for measuloop directional couplers include operating frequency range, coupling degree (or transition attenuation), directionality, and input/output standing wave ratio.
1. The coupling degree refers to the decibel ratio of the input power of the main waveguide to the output power of the coupling port under the condition of matching load at each port.
2. The directionality refers to the decibel ratio of the output power of the coupling port to the output power of the isolation port under the condition of matching load at each port. Directional couplers are widely used for signal sampling in power distribution and microwave measurement.
Qualwave supplies broadband and high power single directional loop couplers in a wide range from 2.6 to 18GHz. The couplers are widely used in many applications.
| Single Directional Loop Couplers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Part Number | Frequency (GHz) | Power (MW) | Coupling (dB) | IL (dB,Max.) | Directivity (dB,Min.) | VSWR (Max.) | Waveguide Size | Flange | Coupling Port | Lead Time (Weeks) |
| QSDLC-9000-9500 | 9~9.5 | 0.33 | 30±0.25 | - | 20 | 1.3 | WR-90（BJ100） | FBP100 | SMA | 2~4 |
| QSDLC-8200-12500 | 8.2~12.5 | 0.33 | 10/20/30±0.25 | 0.25 | 25 | 1.1 | WR-90（BJ100） | FBP100 | N | 2~4 |
| QSDLC-2600-3950 | 2.6~3.95 | 3.5 | 30±0.25 | 0.15 | 25 | 1.1 | WR-284（BJ32） | FDP32 | N | 2~4 |
| Double Ridged Single Directional Loop Couplers | ||||||||||
| Part Number | Frequency (GHz) | Power (MW) | Coupling (dB) | IL (dB,Max.) | Directivity (dB,Min.) | VSWR (Max.) | Waveguide Size | Flange | Coupling Port | Lead Time (Weeks) |
| QSDLC-5000-18000 | 5~18 | 2000W | 40±1.5 | - | 12 | 1.35 | WRD-500 | FPWRD500 | SMA | 2~4 |
-
RF 50ohms 75ohms SMA N BNC F Wireless Impedance...
-
RF High Switching Speed High Isolation Test Sys...
-
Voltage Controlled Attenuators
-
Broadband High Power Low Insertion Loss Power S...
-
RF High Sensitivity BroadBand Telecom Manual Ph...
-
Vertical Solderless Connector