Features:
- 0.1~20GHz
- High Switching Speed
- Low VSWR
-
+86-28-6115-4929 -
sales@qualwave.com
RF High Switching Speed High Isolation Test Systems SP6T PIN Diode Switches
SP6T (Single-Pole, Six-Throw) switch
An SP6T (Single-Pole, Six-Throw) switch is a type of RF/microwave switch that has one input port and six output ports. It provides the ability to select between six different signal paths or to connect/disconnect six components or circuits.
SP6T PIN diode switches utilize PIN diodes as their switching elements, similar to other PIN diode switches. These switches offer fast switching speed, low insertion loss, high isolation, and good linearity.
Here are some key features and considerations for SP6T PIN diode switches:
1. Switching Speed: SP6T PIN diode switches provide fast switching speeds in the nanosecond range, allowing for quick signal path selection or component/circuit switching.
2. Insertion Loss: These switches typically have low insertion loss, minimizing signal degradation and preserving signal integrity.
3. Isolation: SP6T PIN diode switches offer high isolation between the different output ports when the switch is in the "off" state, reducing unwanted signal coupling and crosstalk.
4. Power Handling: They have the capability to handle high RF power levels, making them suitable for applications requiring high-power signal switching.
5. Control Voltage: SP6T PIN diode switches require a control voltage to select one of the six output ports. This control voltage is supplied to the PIN diodes to enable the desired switching operation.
6. Driver Circuitry: A driver circuit is necessary to provide the appropriate control voltage to the PIN diodes for switching in SP6T PIN diode switches.
7. Applications: SP6T PIN diode switches find applications in RF and microwave systems that require multi-path switching capabilities. They are used in communication systems, radar systems, test and measurement equipment, and other applications where signal routing, path selection, or component/circuit switching is needed.
When selecting an SP6T PIN diode switch, consider factors such as switching speed, insertion loss, isolation, power handling, control voltage requirements, and compatibility with your specific application. Qualwaves Inc. supplies SP6T work at 0.1~20GHz, with insertion loss less than 4.5dB and isolation greater than 60dB. TTL logic control is adopted.
Part Number |
Datasheet |
Frequency(GHz, Min.)  |
Frequency(GHz, Max.) |
Absorptive/Reflective |
Switching Time(nS,Max.) |
Power(W) |
Isolation(dB,Min.) |
Insertion Loss(dB,Max.) |
VSWR(Max.) |
Lead Time(Weeks) |
|---|---|---|---|---|---|---|---|---|---|---|
| QPS6-100-12000-A |  |
0.1 | 12 | Absorptive | 120 | 1 | 70 | 3.2 | 1.7 | 2~4 |
| QPS6-100-18000-A | |
0.1 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-100-20000-A | |
0.1 | 20 | Absorptive | 120 | 1 | 60 | 4.5 | 2 | 2~4 |
| QPS6-400-8000-A | |
0.4 | 8 | Absorptive | 120 | 1 | 80 | 2.5 | 2 | 2~4 |
| QPS6-400-18000-A | |
0.4 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-500-18000-A | |
0.5 | 18 | Absorptive | 100 | 1 | 60 | 3.2 | 1.7 | 2~4 |
| QPS6-500-20000-A-1 | |
0.5 | 20 | Absorptive | 120 | 1 | 60 | 4.5 | 2 | 2~4 |
| QPS6-500-20000-A-2 | |
0.5 | 20 | Absorptive | 100 | 1 | 60 | 3.6 | 2 | 2~4 |
| QPS6-800-18000-A | |
0.8 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-800-20000-A | |
0.8 | 20 | Absorptive | 120 | 1 | 60 | 4.5 | 2 | 2~4 |
| QPS6-1000-2000-A-1 | |
1 | 2 | Absorptive | 120 | 1 | 75 | 1.3 | 1.5 | 2~4 |
| QPS6-1000-2000-A-2 | |
1 | 2 | Absorptive | 100 | 1 | 80 | 1.3 | 1.5 | 2~4 |
| QPS6-1000-8000-A-1 | |
1 | 8 | Absorptive | 120 | 1 | 65 | 2.5 | 1.5 | 2~4 |
| QPS6-1000-8000-A-2 | |
1 | 8 | Absorptive | 100 | 1 | 70 | 2.2 | 1.7 | 2~4 |
| QPS6-1000-18000-A | |
1 | 18 | Absorptive | 100 | 1 | 70 | 4.2 | 2 | 2~4 |
| QPS6-1000-18000-A-1 | |
1 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-1000-18000-A-2 | |
1 | 18 | Absorptive | 100 | 1 | 60 | 3.2 | 2 | 2~4 |
| QPS6-1000-20000-A-1 | |
1 | 20 | Absorptive | 120 | 1 | 60 | 4.5 | 2 | 2~4 |
| QPS6-1000-20000-A-2 | |
1 | 20 | Absorptive | 100 | 1 | 60 | 3.6 | 2 | 2~4 |
| QPS6-2000-4000-A-1 | |
2 | 4 | Absorptive | 120 | 1 | 75 | 1.8 | 1.5 | 2~4 |
| QPS6-2000-4000-A-2 | |
2 | 4 | Absorptive | 100 | 1 | 80 | 1.5 | 1.5 | 2~4 |
| QPS6-2000-8000-A-1 | |
2 | 8 | Absorptive | 120 | 1 | 65 | 2.5 | 1.5 | 2~4 |
| QPS6-2000-8000-A-2 | |
2 | 8 | Absorptive | 100 | 1 | 70 | 2.2 | 1.7 | 2~4 |
| QPS6-2000-12000-A | |
2 | 12 | Absorptive | 120 | 1 | 65 | 3.2 | 1.7 | 2~4 |
| QPS6-2000-18000-A-1 | |
2 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-2000-18000-A-2 | |
2 | 18 | Absorptive | 100 | 1 | 60 | 3.2 | 2 | 2~4 |
| QPS6-2000-20000-A-1 | |
2 | 20 | Absorptive | 120 | 1 | 60 | 4.5 | 2 | 2~4 |
| QPS6-2000-20000-A-2 | |
2 | 20 | Absorptive | 100 | 1 | 60 | 3.6 | 2 | 2~4 |
| QPS6-3000-6000-A-1 | |
3 | 6 | Absorptive | 120 | 1 | 65 | 2 | 1.5 | 2~4 |
| QPS6-3000-6000-A-2 | |
3 | 6 | Absorptive | 100 | 1 | 75 | 1.8 | 1.5 | 2~4 |
| QPS6-4000-8000-A-1 | |
4 | 8 | Absorptive | 120 | 1 | 65 | 2.5 | 1.5 | 2~4 |
| QPS6-4000-8000-A-2 | |
4 | 8 | Absorptive | 100 | 1 | 70 | 2.2 | 1.7 | 2~4 |
| QPS6-5000-10000-A-1 | |
5 | 10 | Absorptive | 120 | 1 | 65 | 2.8 | 1.7 | 2~4 |
| QPS6-5000-10000-A-2 | |
5 | 10 | Absorptive | 100 | 1 | 70 | 2.3 | 1.7 | 2~4 |
| QPS6-6000-12000-A-1 | |
6 | 12 | Absorptive | 120 | 1 | 65 | 3.2 | 1.7 | 2~4 |
| QPS6-6000-12000-A-2 | |
6 | 12 | Absorptive | 100 | 1 | 70 | 2.5 | 1.7 | 2~4 |
| QPS6-6000-18000-A | |
6 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-8000-12000-A | |
8 | 12 | Absorptive | 100 | 1 | 70 | 2.5 | 1.7 | 2~4 |
| QPS6-12000-18000-A-1 | |
12 | 18 | Absorptive | 120 | 1 | 60 | 4.2 | 2 | 2~4 |
| QPS6-12000-18000-A-2 | |
12 | 18 | Absorptive | 100 | 1 | 60 | 3.2 | 2 | 2~4 |
-
Phase Locked Dielectric Resonator Oscillators (...
-
RF BroadBand Low Insertion Loss Frequency Conve...
-
Voltage Controlled Phase Shifters
-
SP8T PIN Diode Switches
-
Digital Controlled Phase Shifters
-
Phase Locked Crystal Oscillators (PLXO)