page_banner (1)
page_banner (2)
page_banner (3)
page_banner (4)
page_banner (5)
  • 2 Way Power Dividers/ Combiners
  • 2 Way Power Dividers/ Combiners
  • 2 Way Power Dividers/ Combiners
  • 2 Way Power Dividers/ Combiners

    Features:

    • Broadband
    • Small Size
    • Low Insertion Loss

    Applications:

    • Amplifiers
    • Mixers
    • Antennas
    • Laboratory Test

    A 2-way power divider/combiner

    It is generally used as the high-frequency or intermediate frequency preamplifier of various Radio receiver, and the amplification circuit of high-sensitivity electronic detection equipment. A good Low-noise amplifier needs to amplify the signal while producing as low noise and distortion as possible.

    The power divider/combiner has the following features:

    1.no power loss: The 2-way divider/combiner splitter does not introduce any active power consumption, because it does not require any power supply or amplifier. It achieves power distribution only through passive circuit design, so it does not dissipate power.
    2.balance: The 2-way divider can distribute the input power to the two output ports in equal proportions. This means that at any time, the power of the two output ports will remain equal, which is very important for applications requiring balanced output.
    3.stability: The 2-way power divider/combiner usually has stable working performance and can maintain the balance of power division within a certain frequency range.
    4. wide band: it is suitable for applications with large frequency changes.
    5.low insertion loss: The 2-way power divider/combiner usually has a low insertion loss, that is, the transmission power loss between the input and output ports is very small.

    The performance of a 2-way power divider/combiner may be affected by a number of factors, such as operating frequency, power level, and temperature. Therefore, in the practical application, it is necessary to select the appropriate 2-way power divider/combiner according to the specific needs, and carry out certain performance evaluation and testing.

    The power splitter is widely used in microwave and millimeter wave circuits. In the feed network of array antenna, the power splitter can divide one signal into multiple signals. Applied to microwave solid-state amplifiers, multiple signals can be synthesized into a higher power output signal.

    Qualwave supplies 2-way power dividers/combiners at frequencies from DC to 67GHz, and the power is up to 2000W. Our 2-way power dividers/combiners are widely used in many areas.

    img_08
    img_08

    Part Number

    Datasheet

    RF Frequency

    (GHz, Min.)

    xiaoyudengyu

    RF Frequency

    (GHz, Max.)

    dayudengyu

    Power as Divider

    (W)

    dengyu

    Power as Combiner

    (W)

    dengyu

    Insertion Loss

    (dB, Max.)

    xiaoyudengyu

    Isolation

    (dB, Min.)

    dayudengyu

    Amplitude Balance

    (±dB,Max.)

    xiaoyudengyu

    Phase Balance

    (±°,Max.)

    xiaoyudengyu

    VSWR

    (Max.)

    xiaoyudengyu

    Connectors

    Lead Time

    (Weeks)

    QPD2-0-8000-1 pdf DC 8 1 - 7.5 6 ±0.5 ±5 1.3 SMA&N 2~3
    QPD2-0-10000-2-S pdf DC 10 2 - 1.2 5.9 0.6 2 1.2 SMA 2~3
    QPD2-0-18000-R5-S pdf DC 18 0.5 - 6±1.5 6±1.5 ±0.5 ±11 1.6 SMA 2~3
    QPD2-0-26500-1-K pdf DC 26.5 1 0.1 2 - ±0.3 ±3 1.4 2.92mm 2~3
    QPD2-0-26500-2-S pdf DC 26.5 2 - 7.5 8 ±0.4 ±3 2.5 SMA 2~3
    QPD2-0-40000-2-K pdf DC 40 2 - 7.5 9 ±0.5 ±5 2.5 2.92mm 2~3
    QPD2-0-50000-1-2 pdf DC 50 1 - 7.8 9 ±0.8 ±8 2.5 2.4mm 2~3
    QPD2-0-67000-1-V pdf DC 67 1 - 8 9 ±0.9 ±10 2.5 1.85mm 2~3
    QPD2-0.2-2-10-S pdf 0.0002 0.002 10 - 0.5 20 ±0.2 ±2 1.3 SMA 2~3
    QPD2-1-500-25-S pdf 0.001 0.5 25 25 1 15 0.3 5 1.4 SMA 2~3
    QPD2-1-500-K1-S pdf 0.001 0.5 100 100 0.5 15 0.3 5 1.4 SMA 2~3
    QPD2-1-700-1-S pdf 0.001 0.7 1 0.5 0.6 20 ±0.25 ±1 1.25 SMA 2~3
    QPD2-1-700-2-S pdf 0.001 0.7 2 1 0.75 19 ±0.1 ±1 1.4 SMA 2~3
    QPD2-2-30-2K-N pdf 0.002 0.03 2000 2000 0.15 30 ±0.1 ±1 1.2 N 2~3
    QPD2-2-1000-10-S pdf 0.002 1 10 - 1.2 15 0.2 5 1.6 SMA 2~3
    QPD2-4-30-K8-N pdf 0.004 0.03 800 800 0.3 20 - - 1.3 N 2~3
    QPD2-5-1000-1-B pdf 0.005 1 1 0.5 1 17 0.3 ±3 1.25 BNC 2~3
    QPD2-5-1000 pdf 0.005 1 1 0.5 0.9 19 ±0.3 ±2 1.35 SMA 2~3
    QPD2-10-500-K1-S pdf 0.01 0.5 100 100 0.6 12 ±0.2 ±3 1.8 SMA 2~3
    QPD2-20-500-K1-S pdf 0.02 0.5 100 100 0.9 15 0.2 5 1.6 SMA 2~3
    QPD2-20-500-K35-N pdf 0.02 0.5 350 350 1 8 ±0.2 ±2 1.7 N 2~3
    QPD2-20-1000-1K-7N pdf 0.02 1 1000 1000 0.8 18 ±0.3 ±5 1.4 7/16DIN&N 2~3
    QPD2-20-1000-K2-S pdf 0.02 1 200 200 0.6 20 0.3 5 1.35 SMA 2~3
    QPD2-30-90-K2 pdf 0.03 0.09 200 - 3.5 15 ±0.5 ±5 1.3 SMA, N 2~3
    QPD2-30-300-2-N pdf 0.03 0.3 2 - 6.8 5.6 0.3 ±3 1.2 N 2~3
    QPD2-30-400-20-S pdf 0.03 0.4 20 2 1.8 20 0.2 ±2 1.2 SMA 2~3
    QPD2-30-400-K1-N pdf 0.03 0.4 100 100 0.5 20 0.1 ±3 1.35 N 2~3
    QPD2-30-406-K5-N-1 pdf 0.03 0.406 500 200 0.8 10 ±0.2 ±2 1.6 N 2~3
    QPD2-30-406-K5-S pdf 0.03 0.406 500 500 0.5 20 0.1 3 1.35 SMA 2~3
    QPD2-30-512-K2-S pdf 0.03 0.512 200 200 0.5 20 0.2 5 1.3 SMA 2~3
    QPD2-30-512 pdf 0.03 0.512 300 100 1.4 20 0.2 ±2 1.25 N 2~3
    QPD2-30-512-S pdf 0.03 0.512 30 2 2.8 20 0.3 ±3 1.25 SMA 2~3
    QPD2-30-650-K2-S pdf 0.03 0.65 200 - 0.85 10 ±0.2 ±2 1.6 SMA 2~3
    QPD2-30-1000 pdf 0.03 1 20 2 2.8 20 ±0.3 ±3 1.3 SMA 2~3
    QPD2-30-3000-1-S pdf 0.03 3 1 0.5 2.5 10 0.3 ±4 2.2 SMA 2~3
    QPD2-30-3000-2-N pdf 0.03 3 2 - 6.8 5.6 0.3 - 1.2 N 2~3
    QPD2-50-500 pdf 0.05 0.5 1 0.5 1 18 0.3 ±3 1.3 SMA, N 2~3
    QPD2-52-57 pdf 0.052 0.057 600 60 0.3 20 0.2 ±2 1.25 N 2~3
    QPD2-68-72-1-N pdf 0.068 0.072 1 0.5 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-68-72-30-N pdf 0.068 0.072 30 2 0.4 20 0.2 ±2 1.2 N 2~3
    QPD2-68-72-K2-N pdf 0.068 0.072 200 20 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-70-2700-K1-N pdf 0.07 2.7 100 5 2 20 0.2 ±3 1.5 N 2~3
    QPD2-70-4200-20-S pdf 0.07 4.2 20 2 5 18 0.3 ±3 1.5 SMA 2~3
    QPD2-80-110-30-S pdf 0.08 0.11 30 2 0.4 20 0.2 ±2 1.2 SMA 2~3
    QPD2-80-500-30-S pdf 0.08 0.5 30 2 0.8 19 0.2 ±2 1.25 SMA 2~3
    QPD2-80-500-2K-EN pdf 0.08 0.5 2000 2000 0.4 8 0.2 ±5 1.6 SC&N 2~3
    QPD2-80-1000-K3-S pdf 0.08 1 300 300 0.6 15 0.3 5 1.35 SMA 2~3
    QPD2-80-2000 pdf 0.08 2 30 2 1.8 19 0.2 ±2 1.25 SMA, N 2~3
    QPD2-80-4000-30-S pdf 0.08 4 30 2 2.5 16 0.3 ±3 1.5 SMA 2~3
    QPD2-100-200-K1-N pdf 0.1 0.2 100 10 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-100-350-30-S pdf 0.1 0.35 30 2 1 20 ±0.2 ±2 1.25 SMA 2~3
    QPD2-100-400 pdf 0.1 0.4 30 2 1 22 0.2 ±2 1.2 N 2~3
    QPD2-100-400-K2-N pdf 0.1 0.4 200 20 0.4 20 0.2 ±2 1.2 N 2~3
    QPD2-100-500 pdf 0.1 0.5 50 5 0.5 20 0.2 ±3 1.25 SMA 2~3
    QPD2-100-500-50-N pdf 0.1 0.5 50 3 0.5 20 0.2 ±2 1.25 N 2~3
    QPD2-100-500-K3-N pdf 0.1 0.5 300 20/100 0.5 20 0.2 ±2 1.25 N 2~3
    QPD2-100-500-K4-7 pdf 0.1 0.5 400 100 0.6 20 0.2 ±2 1.25 7/16DIN 2~3
    QPD2-100-512 pdf 0.1 0.512 30 2 0.7 23 0.2 ±2 1.3 N 2~3
    QPD2-100-520-2K-7N pdf 0.1 0.52 2000 2000 0.6 15 0.3 5 1.35 7/16DIN&N 2~3
    QPD2-100-550-K1-N pdf 0.1 0.55 100 10 0.5 20 0.2 ±2 1.2 N 2~3
    QPD2-100-600 pdf 0.1 0.6 30 2 0.8 20 0.2 ±2 1.2 SMA 2~3
    QPD2-100-1000-30-S pdf 0.1 1 30 2 1.2 20 0.2 ±2 1.2 SMA 2~3
    QPD2-100-3000-30-S pdf 0.1 3 30 2 2.1 20 0.1 ±3 1.25 SMA 2~3
    QPD2-100-4000-30-S pdf 0.1 4 30 2 2 16 0.3 ±3 1.4 SMA 2~3
    QPD2-134-3700 pdf 0.134 3.7 30 2 2.2 18 0.3 ±3 1.3 N 2~3
    QPD2-136-174-K3-N pdf 0.136 0.174 300 25 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-138-960-50-N pdf 0.138 0.96 50 3 0.6 18 ±0.2 ±3 1.25 N 2~3
    QPD2-150-980 pdf 0.15 0.98 50 2 0.6 20 0.3 ±3 1.3 N 2~3
    QPD2-200-1000 pdf 0.2 1 30 2 0.6 20 0.2 ±2 1.25 SMA 2~3
    QPD2-200-2000-K4-T pdf 0.2 2 400 400 0.8 - ±0.5 ±6 1.5 TNC 2~3
    QPD2-200-2000 pdf 0.2 2 30 2 0.8 20 0.2 ±3 1.25 SMA 2~3
    QPD2-200-6000 pdf 0.2 6 30 2 2.2 18 0.3 ±3 1.25 SMA, N 2~3
    QPD2-200-6000-50-S pdf 0.2 6 50 5 6 18 0.2 ±3 1.4 SMA 2~3
    QPD2-210-240 pdf 0.21 0.24 50 5 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-225-512-K1-N pdf 0.225 0.512 100 10 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-300-500 pdf 0.3 0.5 50 5 0.3 20 0.2 ±2 1.2 SMA 2~3
    QPD2-300-600 pdf 0.3 0.6 50 5 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-300-600-30-S pdf 0.3 0.6 30 2 0.4 20 ±0.2 ±2 1.2 SMA 2~3
    QPD2-300-900 pdf 0.3 0.9 30 2 0.6 20 0.2 ±2 1.2 SMA 2~3
    QPD2-300-1000-20-N pdf 0.3 1 20 2 0.8 20 ±0.2 ±2 1.25 N 2~3
    QPD2-300-1000-20-S pdf 0.3 1 20 2 0.6 20 0.2 ±2 1.2 SMA 2~3
    QPD2-300-1800-K3-N pdf 0.3 1.8 300 30 0.6 18 0.2 ±2 1.3 N 2~3
    QPD2-300-3000 pdf 0.3 3 30 2 0.9 20 ±0.1 ±3 1.25 SMA, N 2~3
    QPD2-300-18000-30-S pdf 0.3 18 30 5 2.4 18 ±0.3 ±4 1.5 SMA 2~3
    QPD2-300-26500-30-S pdf 0.3 26.5 30 2 3.4 18 ±0.4 ±5 1.6 SMA 2~3
    QPD2-300-67000-12-V pdf 0.3 67 12 1 8.2 18 ±0.7 ±9 1.9 1.85mm 2~3
    QPD2-336-366 pdf 0.336 0.366 30 2 0.3 20 0.2 ±2 1.25 N 2~3
    QPD2-350-520-K15-N pdf 0.35 0.52 150 50 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-350-3800 pdf 0.35 3.8 30 2 1.2 20 0.2 ±3 1.25 SMA, N 2~3
    QPD2-350-6000-30-S pdf 0.35 6 30 2 1.1 20 ±0.05 ±1 1.3 SMA 2~3
    QPD2-380-410-K3-N pdf 0.38 0.41 300 80 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-380-460 pdf 0.38 0.46 100 - 0.3 20 0.2 ±2 1.2 7/16DIN 2~3
    QPD2-380-470-K3-N pdf 0.38 0.47 300 25 0.3 20 0.2 ±2 1.2 N 2~3
    QPD2-380-8000-30-S pdf 0.38 8 30 1 1.6 18 ±0.3 ±3 1.25 SMA 2~3
    QPD2-400-450-K1 pdf 0.4 0.45 100 10 0.2 20 0.2 ±2 1.2 N 2~3
    QPD2-400-470-30-S pdf 0.4 0.47 30 2 0.5 20 0.2 ±2 1.2 SMA 2~3
    QPD2-400-1000-K2-N pdf 0.4 1 200 20 0.4 18 0.2 ±2 1.25 N 2~3
    QPD2-400-1000-K3-N pdf 0.4 1 300 30 0.4 18 0.2 ±2 1.25 N 2~3
    QPD2-400-2700-30-S pdf 0.4 2.7 30 2 0.8 22 0.1 ±1 1.2 SMA 2~3
    QPD2-400-6000 pdf 0.4 6 30 2 1 20 ±0.2 ±2 1.3 SMA, N 2~3
    QPD2-400-7500-20-S pdf 0.4 7.5 20 1 1.5 20 ±0.3 ±3 1.35 SMA 2~3
    QPD2-400-8000 pdf 0.4 8 30 2 1.5 18 0.3 ±3 1.3 SMA 2~3
    QPD2-400-18000 pdf 0.4 18 20 1 1.2 12 0.3 ±5 1.7 SMA 2~3
    QPD2-430-950-30-S pdf 0.43 0.95 30 2 0.3 22 0.2 ±2 1.2 SMA 2~3
    QPD2-500-1000 pdf 0.5 1 30 2 0.4 20 0.2 ±2 1.2 SMA, N 2~3
    QPD2-500-2000-20-S pdf 0.5 2 20 - 0.5 20 0.2 2 1.3 SMA 2~3
    QPD2-500-3000 pdf 0.5 3 30 2 0.6 20 0.2 ±3 1.25 SMA, N 2~3
    QPD2-500-4000 pdf 0.5 4 30 2 0.8 20 0.2 ±3 1.25 SMA 2~3
    QPD2-500-6000 pdf 0.5 6 30 2 1.2 20 0.1 ±1 1.25 SMA, N 2~3
    QPD2-500-6000-30-S-DC pdf 0.5 6 30 2 1.1 20 0.2 ±3 1.3 SMA 2~3
    QPD2-500-6000-30-S-1 pdf 0.5 6 30 - 1 18 0.2 ±2 1.4 SMA 2~3
    QPD2-500-8000-30-S pdf 0.5 8 30 2 1.2 20 ±0.2 ±1 1.32 SMA 2~3
    QPD2-500-8000-30-N pdf 0.5 8 30 2 1.8 20 0.2 ±3 1.25 N 2~3
    QPD2-500-10500-30-S pdf 0.5 10.5 30 1 1.4 18 0.3 ±3 1.45 SMA 2~3
    QPD2-500-18000 pdf 0.5 18 20/30 1 1.5 16 0.3 ±5 1.6 SMA, N 2~3
    QPD2-500-26500-20-S pdf 0.5 26.5 20 - 2.4 17 ±0.4 ±4 1.6 SMA 2~3
    QPD2-500-40000-20-K pdf 0.5 40 20 - 3.5 16 ±0.5 ±6 1.6 2.92mm 2~3
    QPD2-500-50000-20-2 pdf 0.5 50 20 1 3.9 18 ±0.4 ±6 1.7 2.4mm 2~3
    QPD2-555-3400-30-N pdf 0.555 3.4 30 2 0.6 20 ±0.2 ±2 1.2 N 2~3
    QPD2-600-2000 pdf 0.6 2 30 2 0.4 20 0.2 ±3 1.2 SMA 2~3
    QPD2-600-6000 pdf 0.6 6 30 2 0.9 20 ±0.2 ±1 1.25 SMA, N 2~3
    QPD2-700-2700-30-S pdf 0.7 2.7 30 2 0.5 20 0.2 ±2 1.2 SMA 2~3
    QPD2-700-2700-K2-N pdf 0.7 2.7 200 15 0.6 18 ±0.2 ±3 1.25 N 2~3
    QPD2-700-4000 pdf 0.7 4 30 2 0.6 20 ±0.2 ±3 1.25 SMA, N 2~3
    QPD2-700-4700 pdf 0.7 4.7 30 2 1 20 0.2 ±3 1.25 N 2~3
    QPD2-700-5000 pdf 0.7 5 30 2 1 18 0.2 4 1.3 N 2~3
    QPD2-700-9000-20-S pdf 0.7 9 20 1 1.2 18 0.2 ±3 1.25 SMA 2~3
    QPD2-800-1880-K2-N pdf 0.8 1.88 200 20 0.3 25 ±0.2 ±2 1.25 N 2~3
    QPD2-800-2500-30-S pdf 0.8 2.5 30 2 0.5 20 0.2 ±2 1.2 SMA 2~3
    QPD2-800-2700-30-S pdf 0.8 2.7 30 2 0.5 22 ±0.1 ±0.5 1.2 SMA 2~3
    QPD2-800-2700-50-N pdf 0.8 2.7 50 2 0.5 20 0.2 ±3 1.25 N 2~3
    QPD2-800-3000 pdf 0.8 3 30 2 0.6 20 0.2 3 1.25 SMA, N 2~3
    QPD2-800-3800 pdf 0.8 3.8 200 10 0.9 20 ±0.2 ±3 1.3 7/16DIN 2~3
    QPD2-800-4000 pdf 0.8 4 30 2 0.8 22 0.2 3 1.2 SMA 2~3
    QPD2-900-1300-K1-N pdf 0.9 1.3 100 100 0.8 20 0.1 3 1.25 N 2~3
    QPD2-900-2100-30-N-DC pdf 0.9 2.1 30 2 0.5 20 0.2 ±2 1.25 N 2~3
    QPD2-950-2150 pdf 0.95 2.15 30 2 0.4 20 ±0.1 ±2 1.25 SMA, N 2~3
    QPD2-950-2150-DC pdf 0.95 2.15 30 2 0.3 20 0.2 ±2 1.2 SMA, N 2~3
    QPD2-960-9000-10-S pdf 0.96 9 10 - 1.2 15 ±0.6 10 1.6 SMA 2~3
    QPD2-1000-2000 pdf 1 2 30 2 0.4 20 0.2 ±2 1.2 SMA, N 2~3
    QPD2-1000-2000-30-S-DC pdf 1 2 30 2 0.4 20 0.2 ±2 1.2 SMA 2~3
    QPD2-1000-2000-30-T pdf 1 2 30 2 0.5 20 0.2 ±2 1.25 TNC 2~3
    QPD2-1000-2500-30-N pdf 1 2.5 30 2 0.4 20 0.2 ±2 1.2 N 2~3
    QPD2-1000-3000-30-S pdf 1 3 30 2 0.4 25 ±0.1 ±0.5 1.15 SMA 2~3
    QPD2-1000-4000-30-S pdf 1 4 30 2 0.4 20 0.2 ±2 1.2 SMA 2~3
    QPD2-1000-4000-50-S pdf 1 4 50 3 0.8 20 ±0.2 ±3 1.25 SMA 2~3
    QPD2-1000-4000-K2-N pdf 1 4 200 10 1.2 16 0.3 ±4 1.5 N 2~3
    QPD2-1000-8000-30-S pdf 1 8 30 2 0.8 20 0.2 ±3 1.25 SMA 2~3
    QPD2-1000-9000 pdf 1 9 30 2 1.5 20 0.2 ±3 1.25 SMA, N 2~3
    QPD2-1000-12000-20-S pdf 1 12 20 1 1 18 0.3 ±4 1.4 SMA 2~3
    QPD2-1000-18000-20-S pdf 1 18 20 1 1.2 16 0.3 ±3 1.4 SMA 2~3
    QPD2-1000-26500 pdf 1 26.5 20 1 1.2 16 ±0.5 ±6 1.7 SMA, 2.92mm 2~3
    QPD2-1000-40000-20-K pdf 1 40 20 1 1.8 16 ±0.4 ±5 1.8 2.92mm 2~3
    QPD2-1000-50000-20-2 pdf 1 50 20 1 3.2 18 ±0.5 ±6 1.7 2.4mm 2~3
    QPD2-1000-65000-12-V pdf 1 65 12 1 3.8 18 ±0.6 ±8 1.7 1.85mm 2~3
    QPD2-1000-67000-12-V pdf 1 67 12 1 3.9 18 ±0.6 ±8 1.7 1.85mm 2~3
    QPD2-1100-1700 pdf 1.1 1.7 30 2 0.4 20 0.2 ±2 1.2 SMA, BNC 2~3
    QPD2-1300-2400 pdf 1.3 2.4 30 2 0.4 22 0.2 ±2 1.2 SMA 2~3
    QPD2-1350-1450-20-S pdf 1.35 1.45 20 1 0.3 30 0.2 ±2 1.2 SMA 2~3
    QPD2-1500-18000-20-S pdf 1.5 18 20 1 1.2 16 0.3 ±3 1.4 SMA 2~3
    QPD2-1700-5900-30-N pdf 1.7 5.9 30 2 0.5 22 0.2 ±3 1.2 N 2~3
    QPD2-1700-6000-50-S pdf 1.7 6 50 - 0.5 18 ±0.2 ±2 1.4 SMA 2~3
    QPD2-1700-9000-30-S pdf 1.7 9 30 2 0.6 18 0.2 ±3 1.3 SMA 2~3
    QPD2-2000-2300-K1-S pdf 2 2.3 100 - 0.4 20 ±0.2 ±2 1.25 SMA 2~3
    QPD2-2000-2400-30-N pdf 2 2.4 30 2 0.3 20 0.2 ±2 1.25 N 2~3
    QPD2-2000-4000 pdf 2 4 30 2 0.5 20 0.2 ±2 1.25 SMA, N 2~3
    QPD2-2000-4000-125-N pdf 2 4 125 10 0.3 20 0.2 ±3 1.2 N 2~3
    QPD2-2000-4000-K3-N pdf 2 4 300 15 0.5 18 0.2 ±2 1.3 N 2~3
    QPD2-2000-6000 pdf 2 6 30 2 0.6 20 0.2 ±3 1.25 SMA, N 2~3
    QPD2-2000-8000 pdf 2 8 30 2 0.6 20 ±0.2 ±2 1.3 SMA, N 2~3
    QPD2-2000-9000-30-S pdf 2 9 30 2 0.6 20 0.2 ±3 1.25 SMA 2~3
    QPD2-2000-12000-20-S pdf 2 12 20 1 1 18 0.3 ±4 1.4 SMA 2~3
    QPD2-2000-18000-20-S pdf 2 18 20 1 1 18 0.3 ±4 1.4 SMA 2~3
    QPD2-2000-26500-20-S pdf 2 26.5 20 1 1.2 17 ±0.4 ±4 1.6 SMA 2~3
    QPD2-2000-40000-20-K pdf 2 40 20 1 1.6 18 ±0.4 ±4 1.6 2.92mm 2~3
    QPD2-2000-50000-20-2 pdf 2 50 20 1 2.4 18 ±0.4 ±5 1.7 2.4mm 2~3
    QPD2-2000-65000-12-V pdf 2 65 12 1 3.2 16 ±0.6 ±8 1.9 1.85mm 2~3
    QPD2-2000-67000-12-V pdf 2 67 12 1 3.3 18 ±0.6 ±8 1.8 1.85mm 2~3
    QPD2-2200-2300-30-N pdf 2.2 2.3 30 1 0.4 20 ±0.2 ±3 1.2 N 2~3
    QPD2-2400-2500-K3-S pdf 2.4 2.5 300 15 0.3 30 0.2 ±2 1.25 SMA 2~3
    QPD2-2400-2500-K2-S pdf 2.4 2.5 200 10 0.3 30 0.2 ±2 1.25 SMA 2~3
    QPD2-2500-4000-K2-N pdf 2.5 4 200 20 0.6 18 0.2 ±3 1.35 N 2~3
    QPD2-2500-6000-30-S pdf 2.5 6 30 2 0.4 22 ±0.1 ±0.5 1.2 SMA 2~3
    QPD2-3000-8000-30-S pdf 3 8 30 2 0.6 22 0.1 ±1 1.2 SMA 2~3
    QPD2-3000-13000-5-S pdf 3 13 5 1 1.2 18 ±0.3 ±5 1.5 SMA 2~3
    QPD2-3000-26500-20-S pdf 3 26.5 20 1 1.4 17 ±0.4 ±4 1.55 SMA 2~3
    QPD2-3400-3800-30-N pdf 3.4 3.8 30 2 0.3 20 ±0.2 ±2 1.2 N 2~3
    QPD2-3400-3800-K1-N pdf 3.4 3.8 100 10 0.3 20 ±0.2 ±2 1.2 N 2~3
    QPD2-4000-5000-30-S pdf 4 5 30 2 0.4 22 0.2 ±2 1.25 SMA 2~3
    QPD2-4000-6000 pdf 4 6 30 2 0.4 20 0.2 ±2 1.2 SMA 2~3
    QPD2-4000-8000 pdf 4 8 30 2 0.5 20 0.2 ±2 1.25 SMA, N 2~3
    QPD2-4000-12000-20-S pdf 4 12 20 1 0.5 20 ±0.1 ±1 1.25 SMA 2~3
    QPD2-4900-5900 pdf 4.9 5.9 30 2 0.4 20 0.2 ±2 1.25 SMA 2~3
    QPD2-5000-6000-K2-N-IP65 pdf 5 6 200 10 0.5 20 0.2 ±3 1.25 N 2~3
    QPD2-5000-18000-20-S pdf 5 18 20 1 1 20 0.3 ±4 1.35 SMA 2~3
    QPD2-5150-5850-50-N pdf 5.15 5.85 50 3 0.5 20 0.2 ±3 1.25 N 2~3
    QPD2-5150-5850-K2-N pdf 5.15 5.85 200 10 0.6 20 0.2 ±3 1.25 N 2~3
    QPD2-5200-5900-K1-S pdf 5.2 5.9 100 20 0.4 20 0.2 ±2 1.25 SMA 2~3
    QPD2-5700-5900-30-S pdf 5.7 5.9 30 1 0.4 22 ±0.2 ±2 1.2 SMA 2~3
    QPD2-6000-18000-20-S pdf 6 18 20 1 0.8 18 0.3 ±4 1.4 SMA 2~3
    QPD2-6000-18000-K1-S pdf 6 18 100 - 1 15 ±0.3 ±4 1.5 SMA 2~3
    QPD2-6000-40000-20-K pdf 6 40 20 1 1.4 16 0.5 ±5 1.7 2.92mm 2~3
    QPD2-6000-50000-20-2 pdf 6 50 20 1 1.7 16 ±0.4 ±5 1.7 2.4mm 2~3
    QPD2-6000-65000-12-V pdf 6 65 12 1 2.5 16 ±0.8 ±9 1.9 1.85mm 2~3
    QPD2-6000-67000-12-V pdf 6 67 12 1 2.6 18 ±0.6 ±8 1.8 1.85mm 2~3
    QPD2-7000-9000-K2-S pdf 7 9 200 200 0.5 18 ±0.2 ±4 1.3 SMA 2~3
    QPD2-7000-9000-30-S pdf 7 9 30 2 0.4 20 ±0.1 ±2 1.2 SMA 2~3
    QPD2-7100-7300-K4-N pdf 7.1 7.3 400 400 0.4 18 ±0.3 ±4 1.3 N 2~3
    QPD2-8000-12000-20-S pdf 8 12 20 1 0.5 20 ±0.1 ±3 1.25 SMA 2~3
    QPD2-8000-30000-20-K pdf 8 30 20 1 1.2 16 ±0.4 ±4 1.5 2.92mm 2~3
    QPD2-10000-43000-20-K pdf 10 43 20 1 1.3 12 0.4 ±5 1.6 2.92mm 2~3
    QPD2-10000-43300-20-K pdf 10 43.3 20 1 1.6 14 0.5 ±6 1.6 2.92mm 2~3
    QPD2-10700-12750-20-S pdf 10.7 12.75 20 1 0.6 18 0.3 ±3 1.3 SMA 2~3
    QPD2-12400-13650-20-S pdf 12.4 13.65 20 1 0.6 18 0.2 ±3 1.3 SMA 2~3
    QPD2-13500-15000-20-N pdf 13.5 15 20 1 0.4 18 ±0.2 ±3 1.25 N 2~3
    QPD2-17000-31000-20-K pdf 17 31 20 1 1 16 0.4 ±5 1.5 2.92mm 2~3
    QPD2-18000-26500-20-K pdf 18 26.5 20 1 0.6 16 0.4 ±4 1.5 2.92mm 2~3
    QPD2-18000-40000-20-K pdf 18 40 20 1 1 16 0.4 ±5 1.5 2.92mm 2~3
    QPD2-18000-50000-20-2 pdf 18 50 20 1 1.6 18 ±0.4 ±5 1.6 2.4mm 2~3
    QPD2-18000-65000-12-V pdf 18 65 12 1 2.2 18 ±0.5 ±8 1.8 1.85mm 2~3
    QPD2-18000-67000-12-V pdf 18 67 12 1 2.3 18 ±0.6 ±8 1.8 1.85mm 2~3
    QPD2-19000-33000-20-K pdf 19 33 20 1 0.8 18 0.4 ±4 1.5 2.92mm 2~3
    QPD2-20000-22000-20-K pdf 20 22 20 1 1 18 ±0.4 ±4 1.4 2.92mm 2~3
    QPD2-20000-40000-20-K pdf 20 40 20 1 1.2 16 ±0.4 ±5 1.5 2.92mm 2~3
    QPD2-21000-26000-1-K pdf 21 26 1 - 0.95 20 ±0.5 ±8 1.45 2.92mm 2~3
    QPD2-23100-23300-10-K pdf 23.1 23.3 10 - 0.8 18 ±0.3 ±3 1.5 2.92mm 2~3
    QPD2-24000-30000-20-K pdf 24 30 20 1 0.8 17 ±0.4 ±4 1.5 2.92mm 2~3
    QPD2-24000-43500-20-K pdf 24 43.5 20 1 1.3 16 ±0.4 ±5 1.7 2.92mm 2~3
    QPD2-24250-52600-20-V pdf 24.25 52.6 20 - 1.5 17 ±0.5 ±5 1.7 1.85mm 2~3
    QPD2-25500-25600-1-K pdf 25.5 25.6 1 - 0.8 18 ±0.3 ±3 1.5 2.92mm 2~3
    QPD2-26000-31000-20-K pdf 26 31 20 1 1 16 0.4 ±4 1.5 2.92mm 2~3
    QPD2-26000-40000-20-K pdf 26 40 20 1 1.2 16 ±0.4 ±4 1.5 2.92mm 2~3
    QPD2-26000-54000-20-2 pdf 26 54 20 - 2 14 ±0.8 ±6 1.8 2.4mm 2~3
    QPD2-26500-67000-12-V pdf 26.5 67 12 1 2.1 18 ±0.6 ±8 1.8 1.85mm 2~3
    QPD2-27000-52000-10-2 pdf 27 52 10 1 1.8 14 ±0.6 ±6 1.8 2.4mm 2~3
    QPD2-37500-40200-20-V pdf 37.5 40.2 20 1 1 17 ±0.4 ±5 1.6 1.85mm 2~3
    QPD2-40000-67000-12-V pdf 40 67 12 1 2.1 18 ±0.6 ±8 1.8 1.85mm 2~3

    RECOMMENDED PRODUCTS

    • Vertical Solderless Connector

      Vertical Solderless Connector

    • 3 Way Power Dividers/ Combiners

      3 Way Power Dividers/ Combiners

    • RF Low VSWR 2/4/8 Channel High Speed Communication Multi-channel Connectors

      RF Low VSWR 2/4/8 Channel High Speed Communicat...

    • RF High Power BroadBand Test Systems Programmable Attenuators

      RF High Power BroadBand Test Systems Programmab...

    • Voltage Controlled Attenuators

      Voltage Controlled Attenuators

    • RF Small Size BroadBand Telecom Bias Tees

      RF Small Size BroadBand Telecom Bias Tees